Stainless Steel 317L Pipe Fittings

ASTM A403 WP317L are also known as pipe connectors, in a plumbing system one pipe is attached to another in order to lengthen the run or change the flow direction. It is used to combine, divert or reduce the flow of the water supply.317l fittings contains molybdenum it is a low carbon austenitic stainless steel fitting with additions of nickel, chromium, and molybdenum for better corrosion resistance and increased resistance to chemical attack for formic, sulfurous, acetic, citric, and tartaric acids. Stainless Steel 317L Pipe Fittings are useful in applications such as paper and pulp handling equipment, chemical and petrochemical processing equipment, power generation stations, Food processing equipment, textile equipment, etc. It has superior corrosion resistance in difficult environments including a wide range of chemicals, especially in acidic chloride environments.317l elbow provides a change direction in material flow. This adds pressure losses to the system due to its friction, re-acceleration and impact. As the product enters the elbow inlet, it continues moving ahead to the primary impact zone. The product is then diverted at an angle towards the outlet of the elbow. The turning angle is determined by the elbow design, conveying velocity, product characteristic and specific load.A403 WP317L Tee is used for collecting or distributing the fluid from the run pipe. It is a short piece of pipe with 90° branch at the centre. There are two types of tee used in piping system, i.e equal tee and unequal tee.Stainless Steel 317L Reducer is used in pipelines to reduce its size from large to small bore in line with the inner diameter. The length of the reduction is equal to an average diameter of the smaller and larger pipe. It can be used as a diffuser or a nozzle. It helps in meeting the existing piping of varied sizes or hydraulic flow of the piping system.